Thermal Elements http://www.thermal-elements.com Thermal Elements Wed, 23 Sep 2009 11:00:18 +0000 http://wordpress.org/?v=2.8.4 en hourly 1 Fast IR 305 * 305 with 4000 watt halogen flash heaters http://www.thermal-elements.com/en/fast-ir-305-305-with-4000-watt-halogen-flash-heaters-2/ http://www.thermal-elements.com/en/fast-ir-305-305-with-4000-watt-halogen-flash-heaters-2/#comments Wed, 23 Sep 2009 10:38:25 +0000 admin

FastIR_350_enkel_klein_0

Build your one heater system with this module

305 × 305mm
Fitted with 1000W quartz tungsten/halogen heaters (QTM)
4 tube config. – 4KW
5 tube config. – 5KW

]]> http://www.thermal-elements.com/en/fast-ir-305-305-with-4000-watt-halogen-flash-heaters-2/feed/ 0 F.T.E. Full Trough Element 150 – 1000 watt http://www.thermal-elements.com/en/f-t-e-full-trough-element-150-%e2%80%93-1000-watt-2/ http://www.thermal-elements.com/en/f-t-e-full-trough-element-150-%e2%80%93-1000-watt-2/#comments Wed, 23 Sep 2009 10:31:32 +0000 admin FTE2_groot

Long wave Ceramic infrared heating elements

FTE 150 Watt

  • Mean Surface Temperature: 300 Celsius
  • Approximate Time Until Top Temperature: 13 minutes
  • Average Weight: 212 grams
  • Dimensions: 245 × 60 x 31mm
  • Wave Length:2 to 10 Microns
  • Electrical Power Loading: 1.0 W/cm 2 (6.5 W/inch 2)

FTE 250 Watt

  • Mean Surface Temperature: 405 Celsius
  • Approximate Time Until Top Temperature: 13 minutes
  • Average Weight: 213 grams
  • Dimensions: 245 × 60 x 31mm
  • Wave Length:2 to 10 Microns
  • Electrical Power Loading: 1.7 W/cm 2 (10.9 W/inch 2)

FTE 300 Watt

  • Mean Surface Temperature: 430 Celsius
  • Approximate Time Until Top Temperature: 13 minutes
  • Average Weight: 214 grams
  • Dimensions: 245 × 60 x 31mm
  • Wave Length: 2 to 10 Microns
  • Electrical Power Loading: 2.0 W/cm 2 (13 W/inch 2)

FTE 400 Watt

  • Mean Surface Temperature: 500 Celsius
  • Approximate Time Until Top Temperature: 12 minutes
  • Average Weight: 215 grams
  • Dimensions: 245 × 60 x 31mm
  • Wave Length: 2 to 10 Microns
  • Electrical Power Loading: 2.7 W/cm 2 (17.4 W/inch 2)

FTE 500 Watt

  • Mean Surface Temperature: 550 Celsius
  • Approximate Time Until Top Temperature: 11 minutes
  • Average Weight: 215 grams
  • Dimensions: 245 × 60 x 31mm
  • Wave Length: 2 to 10 Microns
  • Electrical Power Loading: 3.4 W/cm 2 (21.7 W/inch 2)

FTE 650 Watt

  • Mean Surface Temperature: 620 Celsius
  • Approximate Time Until Top Temperature: 10 minutes
  • Average Weight: 216 grams
  • Dimensions: 245 × 60 x 31mm
  • Wave Length: 2 to 10 Microns
  • Electrical Power Loading: 4.4 W/cm 2 (28.3 W/inch 2)

FTE 750 Watt

  • Mean Surface Temperature: 650 Celsius
  • Approximate Time Until Top Temperature: 9 minutes
  • Average Weight: 216grams
  • Dimensions: 245 × 60 x 31mm
  • Wave Length: 2 to 10 Microns
  • Electrical Power Loading: 5.1 W/cm 2 (32.6 W/inch 2)

FTE 1000 Watt

  • Mean Surface Temperature: 730 Celsius
  • Approximate Time Until Top Temperature: 8 minutes
  • Average Weight: 225 grams
  • Dimensions: 245 × 60 x 31mm
  • Wave Length: 2 to 10 Microns
  • Electrical Power Loading: 6.8 W/cm 2 (43.5 W/inch 2)

Please note other wattage/voltage configurations available on request.

Ceramic Heating Technology

  1. Using Long wave radiation for curing heating and drying is an environmentally friendly, portable and cost effective method of heating. They have a cast-in iron-chrome aluminium resistance wire which operate in the temperature range of 300 Celsius to 730 Celsius.
  2. The glazed ceramic surface protects the heating coil from the risk of corrosion or chemical attack. Ceramic elements operate in the temperature of 300 Celsius to 730 Celsius producing an IR wavelength on the 2 / 10 micron range. Most plastics and many other materials absorb IR best in this range. Which makes the ceramic heater the most efficient IR radiant emitter on the market.
  3. A range of aluminised steel reflectors are also available to ensure that most of the radiation generated is reflected forward on to the target area.

Standard Features

  1. Iron-chrome aluminium resistance wire.
  2. Heater Voltage: 230 Volts standard.(other voltages available on request)
  3. Heater Wavelength range 2-10 microns.
  4. UL approved
  5. Recommended radiation distance from heater is 150mm to 200 mm.
  6. Average Operating Life: 5,000 – 10,000 Hours.
  7. Supplied with 100mm ± 10mm ceramic beaded power leads.

Options Available:

Wire Termination

  1. Standard (ferrule)
  2. Ring Termination
  3. Contact Ceramicx for other
  4. possible terminations.

Thermocouples

  1. Thermocouple Type J
  2. Thermocouple Type K

Colour

  1. Standard (white)
  2. Yellow
  3. Rose
  4. Black
  5. Other Possibilities On Request.

Specsheet: Plancks law
CAD File: FTE-Model

]]> http://www.thermal-elements.com/en/f-t-e-full-trough-element-150-%e2%80%93-1000-watt-2/feed/ 0 Infrarood snelbakoven voor de voedingsmiddelen industrie http://www.thermal-elements.com/en/infrarood-snelbakoven-voor-de-voedingsmiddelen-industrie/ http://www.thermal-elements.com/en/infrarood-snelbakoven-voor-de-voedingsmiddelen-industrie/#comments Wed, 23 Sep 2009 10:28:58 +0000 admin

Voeding_klein Voeding_middel

Infrarood snelbakoven

Korte golf stralers voor een snelle opwarming.
Lange golf stralers voor een diepe uitwerking.

]]> http://www.thermal-elements.com/en/infrarood-snelbakoven-voor-de-voedingsmiddelen-industrie/feed/ 0 Thermovormen http://www.thermal-elements.com/en/thermovormen/ http://www.thermal-elements.com/en/thermovormen/#comments Wed, 23 Sep 2009 10:26:29 +0000 admin Vacuum+vorming+klein Het voor verwarmen van materiaal, ten behoeve van thermo vormen Vacuum+vorming+klein

Het voor verwarmen van materiaal, ten behoeve van thermo vormen gebeurt in de regel met infrarode verwarmingselementen. Steeds meer draait het hier om efficientie om de productie snelheid zo hoog mogelijk te krijgen en het energie gebruik zo laag mogelijk.
Belangrijk is het juist afstemmen van de infrarood elementen om het materiaal dat verwarmt dient te worden. De gedachte is niet juist dat hoe hoger het vermogen de energie overdracht sneller zou zijn. Alles hangt samen met het afstemmen van het moleculaire absorberen van energie ten opzichte van de golflengte. Een juiste golflengte doen de moleculen bewegen.

]]> http://www.thermal-elements.com/en/thermovormen/feed/ 0 S.Q.E. Special Quartz Element 150 – 1000 Watt http://www.thermal-elements.com/en/s-q-e-special-quartz-element-150-%e2%80%93-1000-watt-2/ http://www.thermal-elements.com/en/s-q-e-special-quartz-element-150-%e2%80%93-1000-watt-2/#comments Wed, 23 Sep 2009 10:24:32 +0000 admin QQE1_groot_1 QQE1_groot_1

Medium wave Quartz infrared heating element

SQE 150 Watt

  • Mean Surface Temperature: 343 Celsius
  • Average Weight: 212grams
  • Dimensions: 124 × 124 × 22mm
  • Wave Length: 1.5 to 5.6 Microns
  • Electrical Power Loading: 1.0 W/cm 2 (6.3 W/inch 2)

SQE 250 Watt

  • Mean Surface Temperature: 438 Celsius
  • Average Weight: 213grams
  • Dimensions: 124 × 124 × 22mm
  • Wave Length: 1.5 to 5.6 Microns
  • Electrical Power Loading: 1.6 W/cm 2 (10.4 W/inch 2)

SQE 400 Watt

  • Mean Surface Temperature: 542 Celsius
  • Average Weight: 215grams
  • Dimensions: 124 × 124 × 22mm
  • Wave Length: 1.5 to 5.6 Microns
  • Electrical Power Loading: 2.6 W/cm 2 (16.7 W/inch 2)

SQE 500 Watt

  • Mean Surface Temperature: 593 Celsius
  • Average Weight: 215grams
  • Dimensions: 124 × 124 × 22mm
  • Wave Length: 1.5 to 5.6 Microns
  • Electrical Power Loading: 3.3 W/cm 2 (20.8 W/inch 2)

SQE 650 Watt

  • Mean Surface Temperature: 664 Celsius
  • Average Weight: 216grams
  • Dimensions: 124 × 124 × 22mm
  • Wave Length: 1.5 to 5.6 Microns
  • Electrical Power Loading: 4.2 W/cm 2 (27.1 W/inch 2)

SQE 750 Watt

  • Mean Surface Temperature: 690 Celsius
  • Average Weight: 216grams
  • Dimensions: 124 × 124 × 22mm
  • Wave Length: 1.5 to 5.6 Microns
  • Electrical Power Loading: 4.9 W/cm 2 (31.3 W/inch 2)

SQE 1000 Watt

  • Mean Surface Temperature: 772 Celsius
  • Average Weight: 225grams
  • Dimensions: 124 × 124 × 22mm
  • Wave Length: 1.5 to 5.6 Microns
  • Electrical Power Loading: 6.5 W/cm 2 (41.7 W/inch 2)

Standard Features

  1. Iron-chrome aluminium resistance wire.
  2. Heater Voltage: 230 Volts standard. (other voltages available on request)
  3. Heater Wavelength range: 1.5 – 5.6 microns.
  4. Recommended radiation distance from heater is 100mm to 200 mm.
  5. Supplied with 100mm ± 10mm ceramic beaded power leads.

Warranty Details

Standard warranty on quartz heaters is 5000 hours under the following conditions:

  1. Rated voltage is not exceeded.
  2. Heaters are mounted horizontally and perpendicular to movement (if any).
  3. Heaters are not subjected to any external force capable of fracturing the quartz tubes.
  4. Heating coils are not exposed to chemically corrosive substances or gases.
  5. Temperature of the aluminized steel body does not exceed 500 Celsius.
  1. Quartz elements are particularly effective in systems where rapid heater response and/or zone controlled heating is required.
  2. They have a broad emission spectrum and hence cover various absorption ranges.
  3. Pillared quartz elements have the same mounting fixture as ceramic elements allowing replacement without difficulty.
  4. This is ideal for design alternation involving the use of materials with different absorption characteristics.

Specsheet: Plancks law
CAD File: SQE

]]> http://www.thermal-elements.com/en/s-q-e-special-quartz-element-150-%e2%80%93-1000-watt-2/feed/ 0 Introduction to Infrared Radiation http://www.thermal-elements.com/en/infrared-product-folder/ http://www.thermal-elements.com/en/infrared-product-folder/#comments Tue, 22 Sep 2009 11:14:07 +0000 admin Products_klein

Infrared product folder

Thermal-Elements provide all three forms of Infrared Heating Element:

  • Long wave – Ceramic elements
  • Medium wave – Quartz elements
  • Short wave – Quartz Tungsten elements

Download PDF: Introduction to Infrared Radiation Thermal-Elements

Specsheet: Infrared products

CAD FIile: General request

]]> http://www.thermal-elements.com/en/infrared-product-folder/feed/ 0 Steam Generator 1000 Watt http://www.thermal-elements.com/en/stoomgenerator-1000-watt/ http://www.thermal-elements.com/en/stoomgenerator-1000-watt/#comments Fri, 18 Sep 2009 13:11:00 +0000 admin (Nederlands) Nederlands.

]]> http://www.thermal-elements.com/en/stoomgenerator-1000-watt/feed/ 0 Droge verzadigde stoomgenerator http://www.thermal-elements.com/en/droge-verzadigde-stoomgenerator/ http://www.thermal-elements.com/en/droge-verzadigde-stoomgenerator/#comments Fri, 18 Sep 2009 13:08:09 +0000 admin

Steam_generator_2_groot

Droge verzadigde stoomgenerator

Versatility

  • Thanks to their small sizes, our steam generators can be used for the most different purposes, such as vacuum systems (for ex. autoclaves).
  • Available power: from 2.000W up to 9.000W
  • Pressure: max. 6 atm. (only on request, higher pressures)
  • Voltage: 110V – 230V – 240V – 400V – 415V

Dry saturated Steam generator properties

In the following conditions:

  • Must result in a vessel (12L) filled with steam under pressure of maximally 2.4 Bar (138 Celsius)Minimal system pressure is minus 0,85 Bar

The requirements of dry saturated steam generator are:

  • The generator should comply to ASME section VIII
  • The maximal pressure should be 4 Bar (1520 Celsius) (safety valve allows 5 Bar)
  • Maximum power should be 1,7 KW (230 V)
  • the water volume should be 0.05L.
  • The chamber must not leak steam, demi-water or air until maximum pressure is reached
  • There may not be corroded by any of the materials mentioned above
  • Must have a life cycle of at least 3000 cycles of sterilization (degradation)
  • The system will also be subject to vacuum
  • This generator should be produced in batches of 25 with a yearly amount of 6000.
  • Production will last for approximately 10 years.
]]> http://www.thermal-elements.com/en/droge-verzadigde-stoomgenerator/feed/ 0 Stoomgenerator voor Sterilisatie, Desinfecteer installatie & autoclaaf http://www.thermal-elements.com/en/stoomgenerator-voor-sterilisatie-desinfecteer-installatie-autoclaaf/ http://www.thermal-elements.com/en/stoomgenerator-voor-sterilisatie-desinfecteer-installatie-autoclaaf/#comments Fri, 18 Sep 2009 13:06:11 +0000 admin Steam_generator_3_groot

Stoomgenerator voor Sterilisatie, Desinfecteer installatie & autoclaaf

  • The dry saturated steam produced with our steam generators guarantees the complete removal of pathogenic bacteria during cleaning of sterilized rooms, materials and surfaces.
  • Available power: from 2.000W up to 9.000W
  • Pressure: max. 6 atm. (only on request, higher pressures)
  • Voltage: 110V – 230V – 240V – 400V – 415V

  • Wherever hygiene and deep cleaning is required or wherever it is necessary to disinfect or sterilize, our steam generators represent the ideal solution as they are suitably designed to resolve hygiene and cleaning problems but – above all – they guarantee personnel safety and environmental protection.
  • As a matter of fact, the saturated steam operates in a non polluting way, with no health and environment danger in contrast with the traditional cleaning systems, which use big quantities of aggressive chemical (acid or basic) products with consequent health risks and discharge problems.
  • The use of saturated steam in industry, above all in the mechanical sector, guarantees the complete removal of any oil, fat, dirt residues on operating or still machines, moulds, equipment, products, etc. without creating damages on their electrical or electronic components.
  • In order to improve the saturated steam cleaning action it is possible to add small quantities of non corrosive, ecological or biodegradable solvents to be nebulized.
  • In food industry and in hospital sector the saturated steam represents the cheapest, safest and most compatible way to sterilize tools, instruments, equipment and to disinfect walls, floors, rooms, etc.
]]> http://www.thermal-elements.com/en/stoomgenerator-voor-sterilisatie-desinfecteer-installatie-autoclaaf/feed/ 0 Micro stoomgenerator voor bevochtiging van voeding en inhalatie apparatuur http://www.thermal-elements.com/en/micro-stoomgenerator-voor-bevochtiging-van-voeding-en-inhalatie-apparatuur/ http://www.thermal-elements.com/en/micro-stoomgenerator-voor-bevochtiging-van-voeding-en-inhalatie-apparatuur/#comments Fri, 18 Sep 2009 13:03:44 +0000 admin Steam_generator_4_groot_0

Micro stoomgenerator voor bevochtiging van voeding en inhalatie apparatuur etc.

  • Reduced thermal energy consumption and high performance.
  • Available power: on request, from 150W
  • Voltage: 110V – 230V – 240V – 400V – 415V
  • The use of thermal energy at not very high temperatures and the small sizes allow reaching operating temperatures in a very short time and with low residual heat at the end of each thermal cycle.
]]> http://www.thermal-elements.com/en/micro-stoomgenerator-voor-bevochtiging-van-voeding-en-inhalatie-apparatuur/feed/ 0