Archive for the ‘Products’ Category

Introduction to Infrared Radiation

Products_klein

Infrared product folder

Thermal-Elements provide all three forms of Infrared Heating Element:

  • Long wave – Ceramic elements
  • Medium wave – Quartz elements
  • Short wave – Quartz Tungsten elements

Download PDF: Introduction to Infrared Radiation Thermal-Elements

Specsheet: Infrared products

CAD FIile: General request

Steam Generator 1000 Watt

Sorry, this entry is only available in Nederlands.

Droge verzadigde stoomgenerator

Steam_generator_2_groot

Droge verzadigde stoomgenerator

Versatility

  • Thanks to their small sizes, our steam generators can be used for the most different purposes, such as vacuum systems (for ex. autoclaves).
  • Available power: from 2.000W up to 9.000W
  • Pressure: max. 6 atm. (only on request, higher pressures)
  • Voltage: 110V – 230V – 240V – 400V – 415V

(more…)

Stoomgenerator voor Sterilisatie, Desinfecteer installatie & autoclaaf

Steam_generator_3_groot

Stoomgenerator voor Sterilisatie, Desinfecteer installatie & autoclaaf

  • The dry saturated steam produced with our steam generators guarantees the complete removal of pathogenic bacteria during cleaning of sterilized rooms, materials and surfaces.
  • Available power: from 2.000W up to 9.000W
  • Pressure: max. 6 atm. (only on request, higher pressures)
  • Voltage: 110V – 230V – 240V – 400V – 415V

(more…)

Micro stoomgenerator voor bevochtiging van voeding en inhalatie apparatuur

Steam_generator_4_groot_0

Micro stoomgenerator voor bevochtiging van voeding en inhalatie apparatuur etc.

  • Reduced thermal energy consumption and high performance.
  • Available power: on request, from 150W
  • Voltage: 110V – 230V – 240V – 400V – 415V
  • The use of thermal energy at not very high temperatures and the small sizes allow reaching operating temperatures in a very short time and with low residual heat at the end of each thermal cycle.

Direct hot water generator


Steam_generator_5_groot

Direct heet water generator

  • Easy inspection and inside cleaning. It is possible to easily inspect and clean the steam generator inside as the heating element is assembled on the outside.
  • Available power: on request, from 1.000 W
  • Voltage: 110V – 230V – 240V – 400V – 415V
  • Production of dry saturated steam. Our steam generators can easily operate at pressures of 3 bars. These generators produce a steam, that changes in dry saturated steam by passing through special overheating elements and reaching a temperature of 350 , 400 Celsius. This temperature is easily adjustable by changing the overheating element power.

Stoomgenerator for beauty threatment equipment

Steam_generator_6_groot_1

Stoomgenerator for beauty threatment equipment

  • Automatic water level control. It is carried out from the outside due to the thermal effect by assembling a simple electromechanical thermostat or an electronic thermo sensor.
  • Available power: on request, from 300W
  • Voltage: 110V – 230V – 240V – 400V – 415V

(more…)

Steam generator for sauna baths, Turkish baths, etc.

Steam_generator_7_grootSteam_generator_7_groot_electronic+controle

Steam generator for sauna baths, Turkish baths, etc.

  • Control of the thermal exchange efficiency.
  • Available power: on request, from 1.000W
  • Voltage: 110V – 230V – 240V – 400V – 415V

(more…)

Stoomgenerator for autoclaaf

Steam_generator_8_groot_1Steam_generator_8_3D_rendering

Stoomgenerator for autoclaaf

  • Thanks to their small sizes, our Autoclave steam generator can be used for the most different purposes, such as vacuum systems
  • Available power: from 2.000W up to 9.000W
  • Pressure: max. 6 atm. (only on request, higher pressures)
  • Voltage: 110V – 230V – 240V – 400V – 415V

(more…)

Stoomgenerator op maat volgens ASME section VIII

Steam_generator_9_groot

Steam generator comply to ASME section VIII

  • Protection against water corrosion. The heating element is never at direct contact with water as it is brazed outside on the steam generator. Brazing is carried out at a temperature between 1050 to and 1100 Celsius in a controlled atmosphere. At this temperature the steam generator – because of high solubility of some elements inside the stainless steel and its quick cooling – is protected against water corrosion, even against distilled water, which is acid as everybody knows.

(more…)

Jumag Stoomgenerator capaciteit 70 tot 1050 kilogram per uur

Sorry, this entry is only available in Nederlands.

Stoomgenerator voor Sterilisatie & Desinfecteer installatie

Steam_generator_1_kleinSteam_generator_1_groot_0

Stoomgenerator voor Sterilisatie & Desinfecteer installatie

Protection against water corrosion

  • The heating element is never in direct contact with water as it is brazed outside on the steam generator. Brazing is carried out at a temperature between 1050 and 1100 Celsius in a controlled atmosphere.
  • Available power: from 2.000W up to 9.000W
  • Pressure: max. 6 atm. (only on request, higher pressures)
  • Voltage: 110V – 230V – 240V – 400V – 415V

Terrasverwarming & werkplekverwarming 2000 Watt

Sorry, this entry is only available in Nederlands.

Circular infrared heating system utilising long wave ceramic emitters

Projec_A_groot_1

Project_Klein_1

Circular infrared heating system utilising long wave ceramic emitters

Description project sample:

Four zone, 207KW circular infrared heating system utilising long wave ceramic emitters.

Application:

Drying of coarse stone aggregate in rotating steel tube. Application required easy and rapid disassembly of heated sections to facilitate maintenance

(more…)

Horizontal system utilising medium-short wave FastIR quartz tungsten flash heaters

Project_b_grootProject_b_middelProject_b_klein

Horizontal system utilising medium-short wave FastIR quartz tungsten flash heaters

Description project sample:

Eleven zone, 336KW horizontal heating system utilising medium-short wave FastIR (quartz tungsten) heaters.

Application:

Rapid drying of bricks on a high-speed conveyor line. Application also required that heating zones could be rotated out of position for access to conveyor.

(more…)

Thermokoppel type J,L,K, PT 100 weerstand sensor

Sorry, this entry is only available in Nederlands.

Contactloos infrarood sensor voor temperatuur meting

Sorry, this entry is only available in Nederlands.

Infrarood product folder

Sorry, this entry is only available in Nederlands.

Tubular Heaters

tubular_sm_1

Tubular heaters

Tubular heaters are resistance heaters that are used to heat liquids, air and solids. They can be used in a wide range of applications, although they are generally used to create custom heating solutions. The functional usage of tubular heaters is limited only by the space available, the maximum sheath temperature and watt density of the given unit.

(more…)

Cartridge Heaters

cartridge_sm

Cartridge Heaters

Cartridge heaters are generally used in immersion applications. However, due to the compact cylindrical shape of cartridge heaters, they can also be used in a variety of other applications.

Important parameters to consider when specifying cartridge heaters are maximum operating or sheath temperature, AC voltage required, watts and watt density. Maximum operating temperature is the maximum temperature that the sheath covering the heater may reach.

(more…)

Flexible Heaters

flexible_sm2

Flexible Heaters

Rugged yet flexible grommeted silicone rubber insulated etched foil heaters wrap and, with lacing, are cinched in position around the length of a trailer tank’s inner liner and against its convex-shaped end cap. This enables temperature sensitive end-product components such as liquid chocolate and liquid pharmaceuticals to travel safely cross country and arrive in readily usable, protected condition for conversion to finished commodities at manufacturing destinations.

This enables temperature sensitive end-product components such as liquid chocolate and liquid pharmaceuticals to travel safely cross country and arrive in readily usable, protected condition for conversion to finished commodities at manufacturing destinations.

Band and Nozzle Heaters

bandnozzle_sm

Band and Nozzle Heaters

High performance Band heater and the standard band heater for specialized constructions band and nozzle heaters are ideal for every type of plastics processing equipment.

Various connection types are available: box with cable, with screw terminals, with cable, with plug and with gland seal.

Stylesheet: Heating bands the solution for the heating of tubes an cylinders

HotMicroCoil Heaters for hotrunner systems and nozzles

Hotmicrocoil_heater_klein

Our HotMicroCoil Heaters have

a varied operative range. Most important applications
are nozzles for hotrunner systems or hot melting nozzles.
Continuous process improvement is the guarantee for our
continuously high level of quality. Hot / Microcoil heaters can be
supplied coiled to your requirements or just straight to be coiled afterwards.
For Hotcoils it is also possible to integrate a thermocouple.

Assembly instructions

  1. Because of the hygroscopic characteristic of the used ceramic insulation materials they absorb moisture. Therefore we send our Hot / Microcoil heating elements usually in air-tightly closed plastic bags. When stored unprotected in environmental air it is absolutely important to check the insulation resistance before use and / if necessary / to dry the elements (controlled start-up or drying oven).
  2. Elements which are bent once, must not be altered anymore. The connection area as well as the first 5 mm unheated area must not be deformed at all.
  3. The temperature stress of max. 750 Celsius on the tube is not valid for the connection area. The temperatures arising in the connection area determine decisively the suitability of the available terminations.
  4. The stated nominal voltage must not be exceeded, otherwise overheat is risked.
  5. Generally it can be said: the better heat is carried off, or flows into the work piece respectively, the higher the surface watt density on the sheath can be.
  6. A too slag fit obstructs the heat conduction and leads to heat accumulation that could overheat and eventually destroy the heater.
  7. In every practice application there are working and environmental parameters which can not be calculated exactly in theory. That is why we recommend generally to test Hot – Microcoil elements in the application under real working conditions before series use.

Specsheet: Productfolder_HotMicroCoil_Heating_Elements

Siliconenrubber verwarmingsfolie

Sorry, this entry is only available in Nederlands.

200 Liter vaten siliconen drumverwaring

Sorry, this entry is only available in Nederlands.